High Silica Chopped Strand for Needle Mat
Category: Mats
Hit: 186
High Silica Chopped Strand is a kind of inorganic fiber, which is drew and winded from glass marbles through a system of Na2O-B2O3-SiO2.High Silica Chopped Strand with low thermal conductivity and high temperature resistance is a kind of excellent high temperature insulator.
High Silica Chopped Strand for needle mat is a kind of inorganic fiber, which is drew and winded from glass marbles through a system of Na2O-B2O3-SiO2.High Silica Chopped Strand with low thermal conductivity and high temperature resistance is a kind of excellent high temperature insulator.
High Silica Chopped Strands for needle mat is specially designed for mat needling. It's easy to card, well to web-laying and easy to needling.
Typeof Glass | HighSilica fiberglass |
Productcode | CYS-HCS539N-100 |
Product Features:
1) High temperatureresistance, heat resistance.
2) Low thermal shrinkage, lowthermal conductivity.
3) High electricalinsulation.
4) Ablation resistance: Aftertwo hours ablation in 1000°C, strands perform well.
5) Non-toxic,asbestos-free, environmental friendly.
Application:
High silica chopped strands for needle mat is widely used in high temperature insulation field as below.
1.High silica needle mat production.
2.High temperature insulation filling materials.
3.High temperature-proof materials.
4.Filtration materials: high temperature gas and liquid.
5. Thermalinsulation of spacecrafts, etc.
Technical Parameters:
Product Code | CYS-HCS539N | CYS-HCS539H |
Filament diameter | 9±3um | 9±3um |
Cut length | 50~100mm | 6~100mm |
SiO2 | >94% | >94% |
Na2O | < 0.8 % | < 0.8 % |
Moisture content | <7% | <1% |
Temperature Resistance | ≥1000°C | ≥1000°C |
Loss on Ignition | <12% | <4% |
Preshrunk Treatment | without | Preshrunk |
Packaging:
Packing | 800kgs/pallet |
Qty/20’FCL | 20 pallets |
NW/20’FCL | 16000kgs |
Storage:
High Silica chopped strands should be stored in its original packaging in a dry and cool place. Best conditions are at temperatures from 15 to 35°C and humidity between 35 and 65%. To ensure safety and avoid damage to the product, the pallets should not be stacked more than three layers high, when the pallets are stacked in 2 or 3 layer, care should be taken to correctly and smoothly move the top pallet.